1. Roll

Roll your spa into position. Your Softub can be rolled through any standard door or yard gate with ease. With the tub weighing less than 75lbs, anyone can move the tub from one place to another.  If you choose to have your Softub outside during the summer and inside during the winter, when it comes time to move it, just empty and roll it inside or out.

2. Connect

Once you place your Softub where you want it, simply connect the Hydromate by tightening three hose clamps. It doesn’t take a professional electrician or spa technician to install your Softub, so there is no added cost for installation. You also don’t need any special tools. A flat-blade screwdriver is all you need to install / connect your Softub.

3. Fill

Fill with water and connect your Softub to any standard 110v, 15-amp outlet.

NOTE:  Most "traditional" hot tubs require a special 220v outlet installed and require a professional electrician for installation.  A Softubs can be plugged into any standard outlet. And with Softub’s Smartchip, a Softub spa maintain the set temperature on the control panel by automatically turning the pump on and off.  The built "Smartchip" acts as a safety mechanism, to prevent the tub from overheating if there’s a problem with the temperature sensors as well as prevents the pump from turning on if the temperature is too high. The Smartchip also prevents the pump from turning on if the incoming voltage is too low, which avoids potential damage to the pump.